Dodge Ram 2500 2010-2016 Workshop Repair Service Manual

Free Dodge Ram 2500 2010-2016 Workshop Repair Service Manual

Dodge RAM 2500 2010-2016

Free Dodge Ram 2500 2010-2016 Workshop Repair Service Manual

Check some information about this manual:

Fig. 78: Reservoir
Courtesy of CHRYSLER GROUP, LLC

1. Install the reservoir bracket to the pump housing (if equipped). Do not reuse the o-rings (install new o- rings). Tighten bolts to specifications. Refer to PUMP, SPECIFICATIONS.

NOTE: Ensure the reservoir (1) is fully seated onto the pump (3).

2. Install the reservoir (1) to the bracket/pump body (3).
3. Install the reservoir mounting bolts (2). Tighten bolts to specifications. Refer to PUMP, SPECIFICATIONS.
4. Install the power steering pump (3). Refer to PUMP, INSTALLATION.
5. Install the serpentine drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
6. Fill the power steering pump. Refer to PUMP, STANDARD PROCEDURE.

Free Dodge Ram 2500 2010-2016 Workshop Repair Service Manual

INSTALLATION – DIESEL ENGINE

1. Position the power steering pump in the vehicle.
2. Align the power steering pump with the mounting holes on the rear bracket. Install the three power steering pump mounting bolts. Tighten the bolts to the proper specifications.
3. Connect the pressure line (2) to the pump with new washers. Tighten the pressure line to the proper specifications. Refer to PUMP, SPECIFICATIONS.
4. Connect the return hose (1) to the pump. Tighten the return hose to the proper specifications. Refer to
PUMP, SPECIFICATIONS.
5. Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
6. Install the left inner wheel well liner.
7. Fill the power steering pump. Refer to PUMP, STANDARD PROCEDURE

Dodge Ram 2500 2010-2016 Workshop Repair Service Manual
Dodge Ram 2500 2010-2016 Workshop Repair Service Manual
Free shipping by email
Price: $29.99

Free Dodge Ram 2500 2010-2016 Workshop Repair Service Manual

Comments on this entry are closed.